GW4A-145英文版说明书.doc

INSTRUCTION FOR INSTALLATION AND MAINTENANCE OF TYPE GW4A-145D(G稺) CENTER BREAK OUTDOOR AC HV DISCONNECTOR1008 OSR.412.095E JIANGSU RUGAO HIGH VOLTAGE ELECTRIC APPARATUS CO., LTD August, 2010 MANUAL OF INSTALLATION AND MAINTENANCE Brief Introduction 1.1 Type GW4(A)-145 outdoor AC high voltage disconnector is a three-phase AC 50Hz high voltage switchgear, suitable for AC circuit with rated voltage 145kV. It is used for switching-on and switching-off circuit without load。 1.2 The disconnector is provided with CS14G manual operating mechanism (hereinafter referred to as “manual mechanism”) or CJ2 electrical operating mechanism, and the eathing switch is equipped with the CS14G mechanism.。 1.3 This equipment is manufactured in compliance with the following Standards: a) IEC62271-102 High Voltage Alternating-Current Disconnectors and Earthing Switches b) GB1985-2004 High Voltage Alternating-Current Disconnectors and Earthing Switches c) GB/T11022 Common Specifications for HV Switchgear and Controlgear Standards d) DL/T486 Order technical rules for Alternating-Current High Voltage Disconnectors and Earthing Switches e) DL/T593 Common Specifications for HV Switchgear and Controlgear Standards Environmental conditions a) Altitude above the sea level is not more than 2000m,； Ambient temperature：－50℃～＋50℃； Wind speed is not more than 34m/s； Earthquake intensity is not more than 9 degree； Icing depth is not more than 10mm； No heavy shock frequently, no explosive substance, inflammables or caustic； he base of installation should be horizontal； Verification of the protection: not less than Ⅲclass in GB/T5582(or according to the requirements of customer)。 Note：When product is used under the condition out of above range, user and manufacture shall consult to confirm. 3. Technical Data 3.1 Main technical data of GW4A-145 series isolating switch and grounding switch are shown in Table 1 as follows： . Writer Proofreader Stand