产品结构与尺寸依据所提供的图面.PDF

LEOCO CORPORATION PRODUCTION SPECIFICATION No. S-96-2508-4 ＊ 2508 Series and 2509 Series Connector ＊ This product specification contains the test method, the general performance and requirements for interconntection system connector. With 2508 series socket and mates with 2509 series header and 2508 series terminal. 1. Construction and dimensions shall be in accordance with the referenced drawings. 产品结构与尺寸依据所提供的图面. 2. Characteristics 特性: Current rating 额定电流: 2.5 A AC,DC Voltage rating 额定电压: 250V AC,DC Temperature rating 额定温度: -40℃ ~ +105℃ Applicable wire 适用的线: conductor construction size #22 ~ #28 3. Electrical performance 电气性能: Item Description Test Method Condition Requirement 项目 内容 测试方法及条件 需求 3-1 Contact Resistance It should be tested in accordance with Initial: 20 mΩ max. 接触阻抗 method 3004.1 of MIL-STD-1344A. After environmental Test: 40 mΩ max. 3-2 Insulation Resistance It should be tested in accordance with Initial: 1000 MΩ min. 绝缘阻抗 Method 3003.1 of MIL-STD-1344A. After humidity test 500 MΩ min. 3-3 Dielectric Unmated connectors shall be tested in No evidence of break- Withstanding accordance with method 3001.1 of down and flashover Voltage MIL-STD-1344A when the AC 1000 V rms 耐电压 for one minute applied between adjacent contacts.