exotic来自异国的(exotic从外面来的).docVIP

When authorities department had concrete to adsorb or glued to connect template, can use to pry stick in the template next point of contact loose move, forbid to pound Template. The template carries on plank noodles to clean up in time after toring down, Tu Shua insulates and prevent°froms gluing to connect ash syrup. Hanging arm to reach a template to tore down should match next say rules:Side mold, strong can promise in the concrete its surface and sharp angle not because of Tore down template but damaged bad after, the square can tore down.Bottom mold can tore down template at 75% squares of concrete strength. The stairs plank mold tores down, should promise that the concrete strength attains 75% of design strength. Template in the door, window and entrance to cave tores down, promise the concrete strength attain 1 MPa. 6.3.12The template starts construction quality standard (1)Template and it accept to have enough strength, just degree and stability, disallowed occurrence bottom to sink and transform, The template seamy side is neat, the joint is tight, and taking off a mold Tu Shua is even. (2)Sprinkle to build to send a specially assigned check in the concrete process, discover that transforming is loose to move a phenomenon to fix in time whole reinforce. (3)Need to check to button up a piece while sprinkling to build concrete, to pull a stud bolt nut tightly solid circumstance. (4)Attention finished product while dismantling a mold protection, forbid to at will break wall noodles to use or the big hammer is malicious to hit a wall of noodles. (5)The template wears wall stud bolt should tightly solid credibility, prevent°from the concrete impact entrance to cave template while sprinkling to build, promise entrance to cave two sides The concrete is symmetry, even sprinkle to build. (6)The big steel template pays the mold quality check standard to see table 6-3. 31 Table 6-3 greatest steel the template pay mold quality check standard The ordinal number item nam