新型胶凝材料的特点及其比较优势-矿冶工程.PDFVIP

25 2 矿　冶　工　程 Vol.25 №2 2005 04 MINING AND METALL RGICAL ENGINEERING April 2005 ① 冯巨恩, 吴　超, 刘成平, 饶从云 (1. , 410083;2., 435100) 　:, , 。, 325, , 。 , 、、 , 。, , , 。 :;;;;;; :TD863;TD853.34 :A :0253-6099(2005)02-0001-05 Characteristics and Comparative Advantages of aNew Cementing Material 1 1 2 2 FENG Ju-en , WU Chao , LIU Cheng-ping , AO Cong-yun (1.School of Resources and Safety Engineering, Central South University, Changsha 410083, Hunan, China;2.Hubei Sanxin Gold Copper Limited-liability Company, Daye 435100, Hubei, China) Abstract:A great breakthrough has been made in the research of a filling cementing material for mine, a cementing material with water-quenching steel slag as primary raw material.Thematerial is made of steel slag and a small amount of gypsum and activator.A performance test show that thematerial has indexes exceedingwith the requirement of 325 Portland cement but a shortage of poor weather resistance, which makes it unfit to use for ground works.In order to draw a conclusion more objec- tively, the new material was compared with Portland cement, flyash cement and high-moisture solidifying backfill in perfor- mance on same conditions.Through the standardization of the decision matrix, was realized the unification of different dimen- sion parameterswhich can have accurate comparison and theparameterswhich can be fuzzily determined only.Finally, subjec- tiveweighting, objectiveweighting and decision orderwere found by utilizing multi-factor classificationmethod so that the com- parative advantage of the new cementing material was established. Key words:steel slag;cementing material;filling;multi-attribute;multi-factor classification;weight;comparative adva