SJ880-2X电子锁(数码)中文原件 - 译文.docVIP

Software L Standard O Name User guide Mainboard code 753-5 Edition A/0 Serial No. 880-2 Page 1/2 Factory master password:. Factory guest password :“8888” I. Password setting and safe opening i. Password setting You may set a guest password with any number of 4-digit when the safe is open, then press “LOCK”to close the safe. For example: Input “1111”and press “LOCK”, “CLOS”and “1111” will be shown on screen successively, the door of the safe will be closed automatically. ii. Use guest password to open the safe. Input any number of 4-digit preset guest password to open the safe.For example: Input “1111”then the safe will be closed automatically. Press “CLR”to clear wrong password and input correct password.“ERR1” will be shown on screen when input wrong password. The safe will be automatically locked for 3 minutes when input wrong password 3 times on end. After 3 minutes, you may operate the safe. II. Under the state of safe closed, changing master password , using master password to open the safe, setting datetime and inquiring record of safe opened. Press “CLR”to change master password. Press “CLOCK”to set year,month,date,hour and minute. Inputthen press“MENU”to inquire record of safe opened. During the count of “9-1”, press “1”to transmit data of the record of safe opened to the printer. Without pressing any key, the door will be opened automatically after counting and guest password will be shown. i. Press “CLR”to change master password. Input any 8-digit password, “Good”shown on the screen means changing master password successfully. ii. Press “CLOCK”to set year, month, date, hour and minute. “★”below means what you will input. year：“YE★★”、month：“ON★★”、date：“DA★★”、hour：“HO★★”、minute：“IN★★”. For example: 16:18, Sep, 28th, 2003 , you may set like this: YE03、ON09、DA28、HO16、IN18. iii. Press“MENU”to inquire record of safe opened,“PAGS”will be shown on the screen. Press “UP”, “P001”shown on the screen means the first message. Soft