WINDLX矩阵相乘.docxVIP

TEST.s 文件;***********multiply an array to an array *************;*********** *************;------------------------------------------------------------------------; Program begins at symbol main; requires module INPUT; Read two arrays, calculate the multiplition of two arrays ; and write the result to stdout;------------------------------------------------------------------------.data ;*** Prompts for input ;输入提示部分dat1: .space 64dat2: .space 64result: .space 64Prompt1: .asciiz Input the martrixA line:Prompt2: .asciiz Input the martrixA column and the martrixB line: Prompt3: .asciiz Input the martrixB column:Prompt4: .asciiz Input the martrixAs number:Prompt5: .asciiz Input the martrixBs number:Prompt6: .asciiz Do you want again (input 0 will no): ;*** Data for printf-Trap ;输出数据设置部分PrintfFormat:.asciiz %d .align2PrintfPar:.wordPrintfFormatPrintfValue: .space4PrintfFormat1:.asciiz \n .align2PrintfPar1:.wordPrintfFormat1PrintfValue1:.space4PrintfFormat2:.asciiz Output the martrixA:\n .align2PrintfPar2:.wordPrintfFormat2PrintfValue2:.space4PrintfFormat3:.asciiz Output the martrixB:\n .align 2PrintfPar3:.wordPrintfFormat3PrintfValue3:.space4PrintfFormat4:.asciiz Output the martrixC:\n .align2PrintfPar4:.wordPrintfFormat4PrintfValue4:.space4.text.globalmainmain: addi r1,r0,Prompt1 jal InputUnsigned movi2fp f1,r1 ;矩阵A的行数 addi r1,r0,Prompt2 jalInputUnsigned movi2fp f2,r1 ;矩阵A的列数，矩阵B的行数 addi r1,r0,Prompt3 jal InputUnsigned movi2fp f3,r1 ;矩阵B的列数 movfp2i r8,f1 movfp2i r6,f2 multu r4,r6,r8 ;总的矩阵A的元素个数r4 addi r2,r10,dat1 ;指向A的首地址 loop1: add r1,r0,Prompt4 ;分别读入矩阵A的元素值 jal InputUnsigned sb 0(r2),r1 ;储存字节，读入元素 addi r2,r2,1 ;元素个数加一 sub r4,r4,1 ;总的矩阵元素个数r4减一 bnez r4,loop1 ;r4不为0时跳转重复输入 addi r10,r0,0 ;分别读出矩阵A的元素值 addi r2,r10,dat1 ;指向A的首地址 sw PrintfValue2,r1 addir14,r0,PrintfPar2 trap 5 loopA: lbu r1,0(r2)