汽车电子助力转向系统（EPS_-TT）传感器原理教程.pptVIP

The output shaft knurl is very important to prevent the shaft from slipping (this will cause self steer). Slipping is prevented by the knurl cutting into the plastic rotor.Rotor/shaft fit should withstand 1.0 NM without slipping. Example of shafts and torsion bar Internal Schematic Contacting sensors require special consideration for the interface filter, “contact noise” is normal and varies randomly with time, rotation speed, position, wear, temperature, vibration… Use an analog filter Use the lowest possible filter frequency for the vehicle analog filter, for example less than 100Hz Less