数字钟程序.docVIP

交通灯控制程序(单片机制作）2009-06-17 11:03 以下是用C语言编写的交通灯控制程序： //晶振11.0592M 定时器0定时，方式1，25ms常数a600,10ms常数dc00,5ms常数ee00, //全红0x55;全绿0xaa;全黄0x00;南北红，东西绿0x66;南北绿，东西红0x99; #includereg51.h sfr smdis = 0x80; sfr jtd = 0xa0; sfr jtdh= 0x90; sfr P4 =0xC0; sfr P4SW =0xBB; sbit weishuang0 = P4^4; sbit weishuang1 = P4^5; sbit weishuang2 = P4^6; sbit NLR = P3^6; sbit NLG = P3^7; unsigned char code md[]={0xf5,0x05,0xb3,0x97,0x47,0xd6,0xf6,0x85, 0xf7,0xd7,0xe7,0x76,0xf0,0x37,0xf2,0xe2,0x00}; //0,1,2,3,4,5,6,7,8,9,A,b,C,d,E,F unsigned char time=0; unsigned char sec=10; unsigned char waittime=10; unsigned char p33; unsigned char fangshi=0; bit flag=0; //运行方式控制,立即转换标志 //状态数组中，第一个数字为P2口的数据，北红绿，西红绿，南红绿，东红绿； //第二个数字为P1口的数据，北（P1.0）西南东黄灯，南左黄灯，北左黄? //南左红（P1.6）绿(P1.6) // 第二个数字为P3口的数据，仅P3。6接北左红，P3.7接北左绿 unsigned char S0[]={0x59, 0x7f ,0x80,35 }; //状态S0 unsigned char S1[]={0xdd, 0xca ,0xc0,3 }; //状态S1 unsigned char S2[]={0x95, 0xbf ,0x40,35 }; //状态S2 unsigned char S3[]={0xf7, 0xa4 ,0xc0,3 }; //状态S3 unsigned char S4[]={0x66,0xbf ,0x80,20 }; //状态S4 //unsigned char S5[]={0x7f,0xd1 ,0x80,3 }; //状态S5 unsigned char S5[]={0x77,0xb5 ,0x80,3 }; //状态S5 unsigned char S6[]={0x55, 0xbf ,0x80,10 }; //状态S6;中断状态或紧急控制状态 unsigned char shu0,shu1,shu2,tc=0; void dissmg() { if(tc==0) { smdis=md[shu0]; weishuang0 = 0; weishuang1 = 1; weishuang2 = 1; } else if(tc==1) { smdis=md[shu1]; weishuang0 = 1; weishuang1 = 0; weishuang2 = 1; } else if(tc==2) { smdis=md[shu2]; weishuang0 = 1; weishuang1 = 1; weishuang2 = 0; } } **************************************************** 定时中断程序 **************************************************** void int_t0() interrupt 1 using 1 { TR0 = 0; time++; tc++; if(tc=3) {tc=0;}