斯巴鲁汽车IPMREZA WRX STI翼豹维修手册-01. Rear Suspension.pdfVIP

W1860BE.book Page 2 Tuesday, January 28, 2003 11:01 PM REAR SUSPENSION REAR SUSPENSION 1. Rear Suspension A: GENERAL The rear suspension is an independent, dual link strut type. The suspension on each side consists of two parallel arranged lateral links, a trailing link, and a strut assembly. The strut assembly consists of a cylindrical double-acting low pressure gas and oil-filled damper and coil spring. The respective component parts of this suspension are optimally designed to act in response to ver- tical, lateral and longitudinal loads transmitted from the tires. Thus, riding comfort and steering sta- bility are substantially enhanced. Longitudinal loads act on each trailing link. Vertical loads act on each coil spring, strut and rubber mount. Lateral loads act on the two lateral links on each side. The crossmember is installed on the body frame via bushings. The stabilizer that extends to the rear of the crossmember, is installed on the body frame via a bracket and to the wheel side end of each rear lateral link via a stabilizer link. On the STi model, the stabilizer link has been changed from a resin made part to a ball joint type. (3) (4) (1) (2) RS-00106 (1) Stabilizer link (3) Stabilizer (2) Rear lateral link (4) Bracket RS-2 W1860BE.book Page 3 Tuesday, January 28, 2003 11:01 PM