实现难削材的稳定加工-京瓷.PDFVIP

刀片材质 PR1535 Insert Grades 车削加工用 MEGACOAT NANO PR1535 MEGACOAT NANO PR1535 for Turning 实现难削材的稳定加工 Stable machining of difficult-to-cut materials ● 在耐热合金·钛合金·不锈钢加工中发挥威力 Most suitable for heat resistant alloy, titanium alloy and stainless steel ● 控制黑皮断续加工中的突发崩损 Reduction of sudden fracture at scaling and interrupted cutting ● 值得信赖的35级(S35/M35/P35相当) “难削材用强韧新材质” Reliable new tough grade for difficult-to-cut materials (for S35/M35/P35) 可广泛对应 钢到难削材的加工 Widely applicable from steel to difficult-to-cut materials 致力于生产效率提高的京瓷 实现难削材的稳定加工实现难 耐热合金、钛合金、不锈钢用耐热合 MEGACOAT NANO PR1535 Stable machining of Difficult-to-cut materials For heat resistant alloy, titanium alloy and stainless steel 根据新钴配合比率根根据新钴配合 强韧化 (破坏韧性值：※提高约23%) Fracture toughness values are Toughening by the new mixing ratio of cobalt at approximately 23% improvements 母材粒子的最合适化