铬对铁基预合金粉末烧结组织和性能的影响.pdf

2006全国摩擦学学术会议——纪念摩擦学40周年 铬对铁基预合金粉末烧结组织和性能的影响 陈华12，郭美娜1，刘利萍1，曹晓杰2，刘勇兵2 ‘的影响，并借助于扫描电镜观察分析磨损形貌、探讨其摩擦磨损机制．研究结果表明，添加低铬的Fe-Ni-Mo-Cu预合金粉末， 在1120℃烧结温度下，可获得较高的烧结密度：微观组织硬度增加随铬量的增加而增加，表观硬度随密度的增加而增加。干 滑动摩擦磨损率随磨损距离的增加先增加而后逐渐斛氐，磨损机制主要为粘着磨损和氧化磨损。 关键词：铁基预合金粉末铬铁粉微观组织干摩擦 中图分类号：TGl662文蒯渐识码：A on TheEffectofChromium Structureand ofIron．basic Sintering Properties Powders Prealloyed CHEN hual。,GuoMeinal，Liu Lipin91，CaoXiaojie2,LiuYongbin92 ofMma4alScienceand Jilin (1．Shool ofJilin EnglineeringChangchunUniversityofTechnology,ChangChun130012,China,2．KeyLaboralory University,Minis虹yofEducation，ChangChun130025，China) Abstract：PowdefsteelsoftheFe-Ni-Mo-Cu-Cr-Cwere cold and metallurgy systempreparedby pressingsintering, wear andtheeffectofchromiumon resistancewere microstructure,sintereddensity,and investigated．Themorphology ofworn andW戌Ttr were that surfaces mechanism SEM．ResultSshows sintered canwere analysedby higher density obtainedfor withlowerCradditionatI themicrohardnessincreasedwith Cr prealloyedpowder 120C，and increasing with additionand hardnessincreased wearrate increaseandthen density．The apparent inereas崦sintered initially with inall mechanisms ale wear decrease distance