DSP的交通灯控制与方案毕业论文.docx

本科生毕业（学位）论文论文题目：基于DSP的交通灯控制与设计学生姓名： 庞文轩 学 号： 201103201415 系 别： 电气信息系 专 业： 电气工程及其自动化 年 级： 11级电气工程 指导教师： 张恒 时 间： 2015年5月 摘要 数字信号处理(Digital Signal Processing，简称DSP)就是用数值计算的方式对信号进行加工的理论和技术，是一门涉及而又广泛应用于许多领域的学科。数字信号处理的目的是对真实世界的连续模拟信号进行测量或滤波，执行转换或提取信息，从而处理现实信号。这项技术在二十世纪六十年代从校园中兴起，到七十年代才由计算机实现部分实时处理，而多用于八十年代前后的高尖端领域。陆续有公司设计出适合于DSP处理技术的处理器。在过去的二十年中，数字信号处理技术飞速发展，在许多领域得到广泛的应用。本设计是基于DSP原理，使用ICETEK-VC5509-A实验箱设计交通灯控制系统软硬件系统，同时利用DSP实验箱显示控制模块发光二极管的亮灭模拟十字路口交通信号，同时考虑紧急情况处理，模仿紧急情况发生时交警手动控制，利用TMS320VC5509DSP片上定时器定时产生时钟计数，再利用计数对应具体时间，设计模拟实际生活中十字路口交通灯。【关键词】：DSP；TMS320VC5509；交通灯控制；发光二极管AbstractDigital Signal Processing is the theory and technology of signal processing by numerical calculation. It is a discipline that involves and is widely used in many fields .The purpose of digital signal processing is to measure or filter the continuous analog signal of the real world. In addition it can perform conversion or extract information to process the real signal. The technology emerged from the campus in the sixtys in twentieth Century, by the seventys by the computer to achieve real-time processing. DSP used for high - point areas in eighty’s. One after another, the company has been designed for DSP processing technology processor. Over the past twenty years, the Digital Signal Processing technology had a rapid development and had a widely used in many areas. This design is based on DSP, operate at ICETEK-VC5509-A experiment box to achieve the aim of controlling the software and hardware system. At the same time, the traffic signal of the traffic signal is simulated by the light of the DSP experimental box. We also consider processing emergency and imitate manual control by policeman when emergency happens. It can produce clock count by timer on TMS320VC5509DSP.And we can correspond the actual time by using count to design simulation of real life crossroads traffic lights.[Key Words]: DSP, TMS320