15 双线性插值.docVIP

15 双线性插值 #include stdafx.h #include opencv2/core/core_c.h #include opencv2/imgproc/imgproc_c.h #include opencv2/highgui/highgui_c.h #include opencv2/legacy/compat.hpp #include opencv2/objdetect/objdetect.hpp #pragma comment(lib, opencv_core220d.lib) #pragma comment(lib, opencv_highgui220d.lib) #pragma comment(lib, opencv_imgproc220d.lib) #pragma comment(lib, opencv_legacy220d.lib) #pragma comment(lib, opencv_objdetect220d.lib) // 支持三通道图像的缩放 void ResizeWorkingBitmap(IplImage *a, IplImage *b, int bx, int by) { unsigned char PtAR = 0, PtBR = 0, PtCR = 0, PtDR = 0, PixelValueR = 0; unsigned char PtAG = 0, PtBG = 0, PtCG = 0, PtDG = 0, PixelValueG = 0; unsigned char PtAB = 0, PtBB = 0, PtCB = 0, PtDB = 0, PixelValueB = 0; unsigned int SpixelColAddr = 0, SpixelRowAddr = 0; unsigned int ColDelta = 0, RowDelta = 0, scaleV = 0, scaleH = 0; unsigned int ContribAandBR = 0, ContribCandDR = 0; unsigned int ContribAandBG = 0, ContribCandDG = 0; unsigned int ContribAandBB = 0, ContribCandDB = 0; unsigned int ContribTem[2048 * 3]; // 图像最大宽度是2048px unsigned int SpixelColNum = 0, SpixelRowNum = 0, DestCol = 0, DestRow = 0; int i = 0; // 计算原图与目标图像之间的比例 scaleH = (a-width 8) / bx; // 水平比例 scaleV = (a-height 8) / by; // 垂直比例 // 目标图像的第一行 for (DestCol = 0; DestCol bx; DestCol++) { // 原图和当前像素的水平距离 SpixelColAddr = DestCol * scaleH; // A点和当前像素的水平距离 printf(SpixelColAddr = %d, , SpixelColAddr); ColDelta = SpixelColAddr 255; printf(col = %d, , ColDelta); // A点序号 SpixelColNum = (SpixelColAddr - ColDelta) 8; printf(SpixelColNum = %d\n , SpixelColNum); // 得到A点的RGB PtAB = a-imageData[3 * SpixelRowNum * a-width + 3 * SpixelColNum]; printf(PtAB = %d, , PtAB); PtAG = a-imageData[3 * SpixelRowNum * a-width + 3 * SpixelColNum + 1]; printf(PtAG = %d, , PtAG); PtAR = a-imageData[3 * SpixelRowNum * a-width + 3 * SpixelColNum + 2]; printf(PtAR = %d\n , PtAR); // 得到B,C,D点的RGB if ((SpixelColNum + 1) a-width) {