LCD显示数字时钟24小时及按键控制时间.docVIP

LCD显示数字时钟24小时及按键控制时间 #includereg52.h #define uchar unsigned char #define uint unsigned int #define ulong unsigned long sbit lcd_rs=P1^0; sbit lcd_rw=P1^1; sbit lcd_en=P1^2; sbit bell=P1^7; sbit p20=P2^0; sbit p21=P2^1; sbit p22=P2^2; sbit p23=P2^3; sbit p24=P2^4; sbit p25=P2^5; uchar code tabledu[]= 0123456789; uchar miao1,miao2,shi1,shi2,fen1,fen2,a; void time_init(); void key(); void delay(uint i) { uint x,y; for(x=i;x0;x--) for(y=110;y0;y--); } void wrrite_com(uchar com) { lcd_rs=0; lcd_rw=0; P0=com; delay(5); lcd_en=1; delay(5); lcd_en=0; } void wrrite_dat(uchar dat) { lcd_rs=1; lcd_rw=0; P0=dat; delay(5); lcd_en=1; delay(5); lcd_en=0; } void init() { lcd_en=0; wrrite_com(0x38); wrrite_com(0x0c); wrrite_com(0x06); } void led_contrl(ulong i) { miao1=((((i%36000)%3600)%600)%60)%10; miao2=((((i%36000)%3600)%600)%60)/10; fen1=(((i%36000)%3600)%600)/60; fen2=((i%36000)%3600)/600; shi1=(i%36000)/3600; shi2=i/36000; } void main() { ulong i=0; init(); time_init(); wrrite_com(0x01); wrrite_dat(tabledu[0]); wrrite_com(0x80+0x40); wrrite_dat(tabledu[0]); wrrite_com(0x81+0x40); wrrite_dat(-); wrrite_com(0x82+0x40); wrrite_dat(tabledu[0]); wrrite_com(0x83+0x40); wrrite_dat(tabledu[0]); wrrite_com(0x84+0x40); wrrite_dat(-); wrrite_com(0x85+0x40); wrrite_dat(tabledu[0]); wrrite_com(0x86+0x40); wrrite_dat(tabledu[0]); wrrite_com(0x87+0x40); while(1) { if(a==20) { p24=0; p25=1; if(p20==0) { delay(5); if(p20==0) { i=i+60; } } if(p21==0) { delay(5); if(p21==0) { i=i-60; } } if(p22==0) { delay(5); if(p22==0) { i=i+3600; } } if(p23==0) { delay(5); if(p23==0) { i=i-3600; } } a=0; led_contrl(i); wrrite_com(0