套保油田降黏剂驱注入参数优选实验.PDF

中国科技论文在线 第 30卷第 3期 石 油 钻 采 工 艺 Vo.l 30No. 3 2008年 6月 OILDRILLING& PRODUCTION TECHNOLOGY June 2008 : 1000- 7393(2008)03- 0110- 05 * 1 1 2 1 3 3 (1. 大庆石油学院教育部重点实验室, 黑龙江大庆 163318; 2. 华北油田公司, 河北任丘 062552; 3. 吉林油田采油工艺研究院, 吉林松原 138003) 摘要: 针对套保油田储层胶结松易出砂隔层薄的特点, 利用一维管式物理模型, 选用了 3种降黏剂,以采收率作为各 种驱替方式的评价手段,进行室内驱油物理模拟实验研 , 确定合适的开采方式和优化的注入参数结果表明, 选用主要成 分为脂肪醇聚氧乙烯醚羧酸盐 A型降黏剂, 最佳降黏剂质量分数为 0. 5%, 注入速度为 1. 0mL/min, 注入段塞为 0. 5PV, 降黏 剂注入方案选择加入 0. 25PV 降黏剂, 然后加入 0. 25 PV 水, 加入 0. 25PV降黏剂直至后续水驱结束该方案具有良好的驱 油效果, 为同类区块降黏剂驱注入参数优选提供借鉴 关键词: 注入参数; 降黏剂; 驱油 : TE357. 46 :A Injection parametersoptimization forviscosity reducer flooding inTaobaoOilfield 1 1 2 1 3 3 ZHA OFajun , LIU Yongjian , ZHA OYujian , WEN Shoubin , LIQimei, WANGWei ( 1. MOE K ey Laboratory of Enhanced O il and Gas R ecovery in Daqing P etroleum Institute, Daqing 163318, China; 2. H uabei Oilfield C ompany, R enqiu 062552, China; 3. Jilin Oilfield O ilP roduction T echnology R esearch Institute, Songyuan 138003, China) Abstract: As theTaobaoOilfield features inpoor cementation, easy sand leak, and thin barrier, using theone dimensionaltubu- lar- typephysicalmode,l taking oilrecovery as the evaluationmeansfor oildisplacement, three kindsofviscosity reducer are selected to conduct the experimentofphysicalsimulationofoildisplacement in the lab, aiming atdetermine suitable producingmethods and op- timized injection parameters. Results show thatthe oildisplacementeffectwillbebetter ifselecting