基于带属性分类树的流程工厂设备相似度计算-计算机辅助设计与图形.PDF

29 10 Vol.29 No.10 2017 10 Journal of Computer-Aided Design Computer Graphics Oct. 2017 基于带属性分类树的流程工厂设备相似度计算 1) 1,2,3)* 2) 覃 力 , 唐卫清 , 李士才 1) ( 中国科学院计算技术研究所 北京 100190) 2) (北京中科辅龙计算机技术股份有限公司 北京 100085) 3) (洛阳中科信息产业研究院 洛阳 471000) (tang@) : 为了解决缺失工程参数时设备相似度的计算问题, 提出一种基于带属性分类树的设备相似度计算方法. 首 先建立满足文中定义的完备性的分类树; 然后将设备映射到类别结点上, 利用结点间的最短距离、信息粒度及属性描 述的平滑交并比计算设备间的相似度. 结果表明, 该方法具有良好的数学特性和物理解释, 且在实际应用中表现良好. : 流程工业; 流程工厂设备; 相似度 ; 分类树 : TP391.41 The Similarity Calculation of Process Plant Equipment Based on Classification Tree with Attributes Qin Li1), Tang Weiqing1,2,3)*, and Li Shicai2) 1) (Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190) 2) (Beijing Zhongke Fulong Computer Technology Co. , Ltd, Beijing 100085) 3) (Luoyang Institute of Information Technology Industries, Luoyang 471000) Abstract: A method based on classification tree with attributes is presented in this paper, to calculate the simi- larity without engineering parameters between different process plant equipments. In this method, it is needed to firstly build a classification tree that can meet the completeness requirements defined below and map the equipment to tree node. Then, min-distance, information granularity and smooth ratio of set to union of attrib- ute descriptions are involved in the calculation. The result shows that it has good mathematical properties and can be physically explained well, it also shows that the method performs well when applied to practice. Key words: process industry; process plant equipment; similarity; classification tree , , , . . , 2014 29 1