第一章建置WebGuard防火墙-KameryIP.PDF

H.264 Megapixel IP Cube Camera TCM-4301 Ver. 090304 Quick Installation Guide 0 Getting Started 1 1.1 PACKAGE CONTENTS TCM-430 1 Power Adaptor (Option) Product CD Camera Stand Warranty Card Accessory 0-1 1.2 PHYSICAL DESCRIPTION 1. Action LED Indicator The LED will light up after IP camera has successfully completed the boot process 2. Built-in Microphone Sensitivity: -36dB ± 3dB(0dB=1V/Pa at 1KHz) S/N Ratio: More than 58dB Directivity: Omni-directional 0-2 3. Audio Output The IP device supports audio output with earphone jack 4. Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). 5. Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continuing to hold the reset button. Step 3: Keep holding the reset button depressed around 6 seconds, then release the reset button. The unit will start up with factory default settings. 6. Power Input Please use power supply of input DC 12V only. 0-1 1.3 BASIC CONNECTIONS Follow the procedures below to co