FIO系统介绍.pptVIP

CENTUM CS3000FIO October, 2003 What is FIO FIO means Field network I/O. FIO is Process I/O modules. A kind of compact, cost-effective, reliable I/O devices, targeted as the industrial standard I/O of next-generation. FIO includes the latest network technologies and field experience. Benefit of FIO The size of I/O units Small foot print of cabinet High density installation Open architecture Remote I/O bus of FIO based on Ethernet. Generic network instruments can be used. All FIO modules can be configured duplex Cost effective wiring solutions Full Compatible for V, XL and Micro-XL I/O card CS3000 System Configuration - Overview System Configuration of KFCS FIO Node Overview KFCS (Direct connection to FCU type) KFCS (Remote I/O type) FIO System Specification for KFCS The bus among FCU and local nodes. (ESB bus) Dedicated Internal Bus Speed : 128 Mbps (RIO 2Mbps) Distance in Total : Max. 10m Remote I/O bus (ER bus) Based on Ethernet Speed : 10 Mbps (RIO 2Mbps) Distance in total :  10base2 --- max. 185m / 10base5 --- max. 500m max. 2 km with repeater (Standard of Ethernet) Up to 4 series of ER bus are available per FCU. Up to 14 remote nodes can be installed on a FCU. Up to 15 nodes can be installed on a FCU. FFCS Overview FFCS Configuration- Local Node FFCS Configuration – Remote Node FIO System Specification for FFCS The bus among FFCS and local nodes. (ESB bus) Dedicated Internal Bus Speed : 128 Mbps Distance in Total : Max. 10m Remote I/O bus (ER bus) Based on Ethernet Speed : 10 Mbps Distance in total : 10base2 - max. 185m / 10base5 - max. 500m max. 2 km with repeater (Standard of Ethernet) Up to 3 remote nodes can be installed on a FFCS. FIO Specification Connection type with field wiring Isolation type Installation environment Redundancy Replacement capability for the existing V, XL and Micro-XL systems Connection Type with Field Wiring Variety of Field Connections Weidmueller (pressure clamp) terminals: Most popular in Europe and