材料成型锻压毕业设计论文.docVIP

中文摘要 冲压模具在实际工业生产中应用广泛。随着当今科技的发展， 工业生产中模具的使用已经越来越引起人们的重视，而被大量应用到生产中来。冲压模具的自动送料技术也投入到实际的生产中，冲压模具可以大大的提高劳动生产率，减轻工人负担，具有重要的技术进步意义和经济价值复合模，是在压力机的一次行程下,可以同时完成多道工序的冲裁模。可获得更长的模具寿命，更好的金属丝圆度，并且高度可预测的模具磨损性能。复合模是一种具有表面光洁度，最小摩擦力的耐磨人工合成材料。模具寿命长，金属丝表面光洁度较好。优点模具寿命长，故障时间短，效率高。可获得尺寸范围广。优秀的防裂纹和破损的性能。平滑，可预测的模具磨损性能应用非铁的金属丝，特别是在尺寸较大，磨损较大而表面光洁度无关紧要时。弯曲模具的结构设计是在弯曲工序确定后的基础上进行的，设计时应考虑弯曲件的形状、精度要求、材料性能以及生产批量等因素Abstract In actual stamping widely used in industrial production. With the development of science and technology, industrial production in the use of mould has attracted peoples attention, and are applied to production. The stamping technology and automatic feeding into the actual production, stamping mould can greatly improve labor productivity, reduce the burden of technological progress, it has important significance and economic value. So-called composite modulus, is in the press trip, may also completed a number of processes to punch die.It can obtain more long life, better wire roundness, and highly predictable mould abrasion performance. Composite modulus is one kind that has the surface finish, minimum friction resistance synthetic materials. Die life long, the metal surface finish. Its advantages are long life, high efficiency, short time.It can obtain size range,excellent performance of cracks and prevent damage. Smooth, predictable mould abrasion performance. Mainly used in nonferrous metal wire, especially in large size is larger, wear and surface finish irrelevant. So-called bending, metal material is the curved line will turn into a certain Angle and the shape of the technological process. The structure design of bending die bending process is determined based on the design of curved, should be considered when thinking about the shape, accuracy requirement, material properties such as production batch. This is the design of the hinge and core stamping mould design, through the analysis of this topic, and finally determined to study the bending modulus and four sta