Part 12 - Ice Fatigue SACST 培训教材.pdf

Part 12 - Ice Fatigue Preparation 1) Under “Training Project”, create “Ice Fatigue” subdirectory 2) Under “Ice Fatigue”, Create “Foundation SE”, “Modes” and “Fatigue” subdirectories. 3) Copy SACINP.STA model file, SEAINP.STA and PSIINP.DAT soil data from “\Spectral Earthquake\Static SE” directory to “Foundation SE” directory. Creating foundation superelement under “Foundation SE” directory, 1) Modifying Seastate file SEAINP.STA Delete EQKS from LCSEL and load combinations. Rename load case GRVX to X000: delete ACCEL line and modifying INCWGT to include only ANOD and WKWY for possible wave loads. Add 000 direction wave at 2.5m wave height @ 7.5 sec wave period, stream function wave theory will be used in 18 steps for maximum base shear. Rename load case GRVY to Y090: delete ACCEL line and modifying INCWGT to include only ANOD and WKWY for possible wave loads. Add 090 direction wave at 2.5m wave height @ 7.5 sec wave period, stream function wave theory will be used in 18 steps for maximum base shear. In load combinations using X000 to replace GRVX and Y090 to replace GRVY. Portion of modified Seastate input shall looks like following, LDOPT NF+Z 1.025 7.85 -79.50 79.50 MN NPNP K LCSEL SUPX SUPY … LOAD LOADCNDEAD INCWGT ANODWKWY DEAD DEAD -Z M LOADCNMASS INCWGT MASS ACCEL 1.0 N CEN1 LOADCNX000 INCWGT ANODWKWY WAVE WAVE STRE 2.5 7.50 0.00 D 20.0 18MS 0 LOADCNY090 INCWGT ANODWKWY WAVE WAVE STRE 2.5