Part 21 - Earthquake Collapse SACST 培训教材.pdf

Part 21 - Earthquake Collapse Preparation 1) Under “Training Project”, create “Earthquake Collapse” subdirectory 2) Under “Earthquake Collapse”, Create “Static SE”, “Modes”, “Equivalent Load” and “Seismic Collapse” subdirectories. 3) Copy SACINP.STA, SEAINP.STA and PSIINP.DAT from “\Spectral Earthquake\Static SE” to “Static SE”. Create Superelement under “Static SE” directory for Dynpac analysis Modifying SEAINP.STA to reflect ductility level horizontal force. The X and Y horizontal acceleration will be modified from 0.08 G to 0.16 G in load case GRVX and GRVY. The modified portion of seastate file shall looks like this, LOADCNGRVX INCWGT MASSANODWKWY ACCEL 0.16 CEN1 LOADCNGRVY INCWGT MASSANODWKWY ACCEL 0.16 CEN1 Create modal extraction under “Modes” Copy SEAINP.DYN from “\Spectral Earthquake\Modes” to “Modes” directory. Create modal extraction run file, using superelement created in “Static SE” directory. Run Dynpac analysis. Create dynamic response input DYRINP.EQK for equivalent earthquake load generation 1) Copy DYRINP.EQK from “\Spectral Earthquake\Spectral Seismic” to “Equivalent Load” directory. 2) Modifying DYRINP.EQK Delete STCMB line. Add simulated earthquake output data EQKLOD line: Load will be generated corresponding to max base shear; load generation type = ALL for all 4 directions. Change overall response factor from 0.15 G to 0.30 G corresponding to ductility level earthquake. Earthquake Collapse - 1 The created dynamic