BTA深孔钻削分析毕业设计论文.doc

宁XX大学 毕业设计(论文) BTA深孔钻削分析 所在学院 专 业 班 级 姓 名 学 号 指导老师 年 月 日 摘 要 深孔钻削加工在机械加工领域中占有非常重要的地位，约占孔加工量的40%以上。随着科学技术的进步，新型高强度、高硬度和高 价值难加工深孔零件的不断出现，加工工件在加工深度、加工精度以及加工效率上要求的不断提高，使得深孔加工成为机械加工的关键工序和加工难点。传统的加工 方法由于工艺系统刚度，切削排出及冷却润滑的问题。越来越难以满足甚至根本达不到现在的深孔加工在精度、效率、材料上的要求。所以这时的深孔加工需要一种 特定的钻削技术的支持。随着我国机械制造业的迅速发展，使得原本局限于军事工业、航空航天等特定领域的深孔加工技术及装备在我国各行业也得到了广泛的应用。BTA深孔钻切削液从钻杆与孔壁的间隙处送入，靠切削液的压力将切屑从钻杆的内孔中排出。BTA深孔钻适用于钻削孔径6毫米以上，孔深与孔径之比小于100的深孔，其生产效率比枪钻高3倍以上。Abstract Deep hole drilling process in the field of mechanical processing occupies a very important position, accounting for about40% of the volume of the above the hole processing. With the progress of science and technology, high strength, high hardness and high value of difficult to machining deep hole parts appear continuously, processing a workpiece in machining depth, machining precision and processing efficiency requirements continue to increase, the deep hole processing becomes the key process and mechanical processing machining. The traditional processing method due to the rigidity of processing system, cutting discharging and cooling lubrication problem. More and more difficult to meet or simply not up to now the deep hole processing in the precision, efficiency, material requirements. So when the deep hole processing require a specific drilling technical support. Chinas machinery manufacturing industry is developing rapidly, which was confined to the military industry, aerospace and other specific areas of deep hole machining technology and equipment in our country each industry has been widely applied. BTA deep hole drilling of deep hole of a, specific cutting fluid from the drill pipe and the hole wall at the gap into, by cutting fluid pressure will chip from the drill hole discharge. BTA deep hole drilling for drilling bore6 mm above, hole depth and diameter of less than 100holes, the production efficiency is 3 times higher than the gun drill. This paper focuses on the BTA deep hole drilling expl