between veneering ceramics and ceriastabilized zirconia英文资料.pdfVIP

University of Zurich Zurich Open Repository and Archive Winterthurerstr. 190 CH-8057 Zurich http://www.zora.uzh.ch Year: 2010 Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina Fischer, J; Stawarczyk, B; Sailer, I; Hämmerle, C H F Fischer, J; Stawarczyk, B; Sailer, I; Hämmerle, C H F (2010). Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina. The Journal of Prosthetic Dentistry, 103(5):267-274. Postprint available at: http://www.zora.uzh.ch Posted at the Zurich Open Repository and Archive, University of Zurich. http://www.zora.uzh.ch Originally published at: The Journal of Prosthetic Dentistry 2010, 103(5):267-274. Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina Abstract STATEMENT OF PROBLEM: Ceria-stabilized tetragonal ZrO(2)/Al(2)O(3) nanocomposite (Ce-TZP/A) offers superior properties compared to yttria-stabilized zirconia (Y-TZP). However, the bond quality to veneering ceramics has not been investigated. PURPOSE: The purpose of this study was to evaluate the bond strength of different veneering ceramics to Ce-TZP/A. MATERIAL AND METHODS: Cubes of Ce-TZP/A (NANOZR) (edge length, 10 mm) were layered with veneering ceramics (5 mm in thickness) with or without application of a liner and sheared at the interface. The effect of different surface treatments (polished with 3-mum diamond paste or airborne-particle abraded) was evaluated with 1 veneering ceramic (Cerabien ZR). Shear bond strength of 5 additional veneering ceramics (IPS e.max, Initial ZR, Triceram, Vintage ZR, or VITA VM 9) to polished Ce-TZP/A was measured (n=10). Polished Y-TZP (Hint-ELs ZrO(2) HIP) veneered with 2