无线应急通信系统中 3G 功能的设计与实现精选.pdfVIP

中国科技论文在线 无线应急通信系统中3G 功能的设计与实现 李泳池，袁超伟** （北京邮电大学信息与通信工程学院） 5 摘要：无线应急通信系统是一种可以依据通信环境的变化，通过对不同数据通信模式的切换 从而达成对外无间隙通信目的的系统。在系统中 3G 功能子模块以其传据传输速率高，3G 网络覆盖面积广的特点成为系统大部分工作时间里首选的通信方式。本文里将首先介绍无线 应急通信系统的研发背景以及系统中所搭载的华为EM660 3G 通信模块，并在此基础上提出 10 了如何从硬件原理图设计以及通过 C++流程图对软件部分的设计两方面实现了系统所需的 3G 子模块数据通信功能。 关键词：无线通信；无线应急通信系统；EM660；C++；MiniPCI-E；RAS 中图分类号：TN9 19 15 The Design and Implementation for 3G mode in the Wireless Emergency Communication System LI Yongchi, YUAN Chaowei (School of Information and Communication Engineering,Beijing University of Posts and Telecommunications,Beijing 100876) 20 Abstract: Wireless Emergency Communications System is a system that can switch to variety of communication mode according to changes of the communication environment. This system can reach the goal of Uninterrupted communication. Because of the characteristics of the wide network coverage area and the fast data transfer rate, the 3G mode in the system is the preferred way of communication in most of the work time. This paper firstly introduced the background of 25 the Wireless Emergency Communications System and the HUAWEI EM660 3G communication module used in this system, then we introduced how to realize the function of the 3G data transfer in two aspects. One is how to design the part of hardware , the other is how to realize the software part in the way of introducing the flow chat. Finally, We proved the accuracy of the design in the way of testing the hardware part and software part together. 30 Key words: Wireless-communication; Wireless Emergency Communications System; EM660 ； C++; MiniPCI-E; RAS 0 引言 应急通信