毕业论文-基站节能装置中的测控模块软、硬件设计.docVIP

毕业设计 2012年06月01日 基站节能装置中的测控模块软、硬件设计 摘要 基站对室内的环境要求很高，它对室内的温度、湿度等的要求也是比一般的设备高很多。温监控与控制DHT21/AM2301主要实现对温度、湿度的检测，将温度湿度信号通过传感器进行信号的采集并转换成数字信号，再将信号传送至单片机STC89C54RD+进行数据的分析和处理，为显示和温湿度控制电路提供信号，实现对基站温湿度的检测和控制。基站的温度、湿度检测与通风系统、空调控制系统，形成基站机房环境智能监测控制系统，智能开启或者关断通风系统或者空调，可达到省电的目的。 关键词：温湿度；DHT21/AM2301；单片机；STC89C54RD+；节能 The Soft, Hardware Design of Measuring And Control Module of Base Station Energy Conservation Device ABSTRACT Base station on the indoor environment is demanding, it is the indoor temperature, humidity, and other requirements are much higher than the average equipment. Real-time temperature and humidity of the base station to monitor and control is particularly important. The design is based on microcomputer temperature and humidity measurement and control system, modular, hierarchical design. Using a new type of intelligent temperature sensor DHT21/AM2301 to achieve temperature, humidity detection，The temperature and humidity signals through the sensor signal acquisition and conversion into a digital signal, Then the signal is transmitted to the STC89C54RD+ data analysis and processing, display and temperature and humidity control circuit provides signals, realize the base station temperature and humidity measurement and control. Base temperature, humidity detection and ventilation system, air conditioning system, forming a base station room environment intelligent monitoring control system, intelligent on or off the ventilation or air conditioning, can achieve the purpose of power. The system has the advantages of simple circuit, high integration, stability, convenient adjustment, high detecting precision, which has practical value. Key words: Temperature and humidity ; DHT21/AM2301 ;Microcomputer; STC89C54RD+; Energy conservation 目 录 第一章 绪论 1 1.1 课题提出的意义 1 1.2 现状分析 1 1.3 新风节能技术 1 1.4 采取的有效措施 1 第二章 系统总体设计 3 2.1 设计的主要内容及要求 3 2.2 系统原理 3 2.3 系统工作流程 4 2.4 主要技术性能特点 5 2.5 系统运行逻辑 5 第三章 基站节能测控模块的硬件电路设计 6 3.1 芯片介绍 6 3.1.1 STC89C54RD+介绍 6 3.1.2 1602字符型LCD