钛合金薄板激光和钨极氩弧焊残余应力测试研究.PDFVIP

7 - Residual Stress Measurements w ith the Hole drilling T echnique in the Joints by the Laser and TIG Welding for a Thin late of Titanium Alloy 1 1 2 1 , , , ( 1 , 710049; 2 , 100024) 1 1 2 1 HE Xiao-dong , ZHA NG Jian-xun , GONG Shui-li , LI Ji-hong ( 1 , 710049, ; Xi an Jiaotong University Xi an China 2 Beijing Aeronautical Manufacturing Technology Research Institute Beijing, 100024, China) : (T IG ) , : , ; , T IG 100M a; , TIG , , , 90% : ; ; TIG ; ; + : T G 115.22 2. 2: A : 1001-4381 (2003) 12-0007-04 Abstract : A hole-drilling technique was used to determine the residual stress in laser beam welding ( LBW) and T IG welding joints of titanium alloy thin plate. The effects of different welding tech- nologies, heat input and post-weld heat treatment on residual stress distributions were analyzed. T he results show that the distribution of laser welding residual stress is similar to that of traditional fusion welding processes, but the zones of distribution are much narrower . Compared to that of T IG welding in HAZ, the values of laser welding residual stress are lower about 100M a. For the different heat input of LBW , the heat input is higher, the weld is wider and the residual stress in HA Z is bigger. ost