上课铃响系统设计.docVIP

毕业设计（论文） 上课铃响系统设计 学 院： 专 业： 姓 名： 学 号： 指导教师： 摘 要 在嵌入式技术的不断发展和广泛应用中，单片机技术起着不可忽视的作用并且在智能控制领域有着举足轻重的地位。本设计是以单片机为核心实现的小嵌入式系统——上课铃响系统设计，设计实现了。可以广泛应用到学校，车站，工厂更好的方便人们的生产、学习和生活。嵌入式系统从系统的角度来定义就是完成复杂功能的硬件和软件，并使其紧密耦合在一起的计算机系统。所以将从硬件和软件两方面的设计来阐述本设计的设计过程硬件设计部分分别从各个功能进行阐述，包括。软件部分分成了个：、、。 关键词：单片机，铃声控制，时钟芯片DS1302，语音芯片ISD2560 Abstract Embedded technology in the continuous development and extensive applications, Single-chip technology plays a role can not be ignored。The field of intelligent control in a pivotal position. The design is based on single-chip microcomputer as the core, To the clock chip DS1302, memory 24C02, ISD2560 voice chip of common tones to achieve a small embedded control system——System design class rings, Play time on the class ring tones as well as different features such as adjustable. Can be widely applied to schools, railway stations, factories, etc. Better facilitate the peoples production, study and life. Embedded systems from the system point of view function are defined as the completion of complex hardware and software, and its tight coupling with the computer system. Therefore, the thesis would be from both hardware and software design to describe the design of the design process. Part of hardware design from the various functional modules, Including the main control module, display module, ring tones playback module, the clock circuit modules, memory modules and power supply circuit module. Software is divided into four sections: The main program design, program design, when transferred, the time display program ring design, and broadcast programming from time to time. Key words: microcontroller, ring control, the clock chip DS1302, voice chip ISD2560. 目 录 摘要 I Abstract I 目 录 III 第一章 引言 1 1.1 课题的选题背景和意义 1 1.2 课题的系统论证 1 第二章 系统硬件设计 4 2.1系统原理框图 4 2.2 硬件电路原理图 4 2.3 硬件电路介绍 4 2.3.1主控模块 4 2.3.2显示模块 9 2.3.3铃