无源滤波器参数的优化.docVIP

摘 要 无源滤波电路是一种历史悠久、应用广泛的滤波电路。它的理论完整，是设计其他类型滤波电路的基础。它被广泛应用于各类电系统中，其性能的优劣直接影响着电系统的工作质量。针对目前根据工程经验或简单的技术经济指标来设计无源滤波器无法得到最优设计参数的现状，对实际因素考虑不全面等问题，提出了一种应用最优化理论对无源滤波电路的元件参数进行优化调整的多目标优化设计方法。 该方法选择各个无源滤波支路的电感、电容的元件参数作为的优化变量，以滤波器的技术指标作为约束条件，以使原滤波器的通带幅度最大波动量达到最小化，同时使电路制作的成本达到最低构成多目标优化设计模型来处理滤波器参数优化的规划问题，并利用复合形算法对上述问题进行求解。 通过上述方法对于无源滤波器参数的优化，获得了较好的结果，经过优化设计的无源滤波器具有良好的综合性能。对其结果进行了比和分析，证明优化后的滤波电路性能在满足技术指标要求的同时，对信号的利用率较高；从经济角度方面看，元件的成本也有所降低。 关键词：无源滤波器；多目标优化；复合形算法 ABSTRACT Passive power filter circuit has a long history, and it is widespread used in power systems. It s integrity theory, the design of other types of filter circuits is based on this. It is widely applicable to all types of power systems, the merits of its performance directly affects the quality of work. Conventional approaches in the design of passive power filters are usually bases on engineering experiences and simple technical economic criterions, but the optimization of parameters can not be realized. In addition, problem such as the lack of practical factors and like that. This paper presents to optimize the design of multi-objective optimization methods which is application to the theory of optimal to adjust the passive filter components parameters. This paper proposes a multi-objective optional strategy based on Complex algorithms to improve filter design performance. The inductance and capacitance of each filter branch is selected as an independent optimization variable, with technical indicators as constraint condition, it takes the largest fluctuations of original filter pass band frequency smallest and the lowest cost as two objectives. By the above method of passive filter parameters optimization, it acquires better results. The designing instantiation of passive power filters shows the superiority and availability of the novel strategy. The proof of the results which were compared and analyzed tells us, performance of the filter circuit that are optimized not only to meet the technical requirements, but