Basic Embroidery Instructions Crochet Lace Series 3资料.pdfVIP

Design Files are in DST and the following home embroidery formats. JEF, HUS, PCS, PES, VIP and XXX. Due to hoop limitations SEW format is not offered and resizing is not recommended. Crochet Look Lace Series 3 (Octagonal) Basic Embroidery Instructions Please read all instructions to the end before starting! Scrigbys Embroidery sets in the LFCL800000 octagonal series 3 have been designed as “stand alone” Lace, stitched onto water soluble stabiliser. Water solubleVilene is highly recommended, and instructions are also enclosed for stitching to solvy or plastic film type stabilisers For assembly, you should have a basic knowledge of sewing, and the ability to guide the pieces accurately under the regular sewing foot of your machine, and have a machine with a triple or multiple stitch zigzag. Motifs from the octagonal crochet set may be mix and matched with others from the octagonal series 3. Designs are usually for the large hoop for your particular machine, (Eg. Pfaff large 120 x 115, brother 5 x 7, or Janome B hoop) Double lengths of edging are supplied for the larger hoops. Finished size of the main square motif is 109mm (4 1/3 ins) Combining designs in a larger hoop is not recommended and Scrigbys cannot be responsible for failures in the lace caused by combining designs. Designs have been tested on a variety of machines. Tension may need to be increased quite a bit on some machines. Failure of designs are us