家用水泵类产品基础培训课件演示.pptVIP

* * * * The pump room (1) is filled when the pump sinks under the water surface. The movement of the pump impeller (2) creates water transport from inside to outside. The water is pressed through the outlet hole (3). Multiplex sealings (4) at the motor shaft and the cable feedthrough provide a perfect sealing of the pump motor. The motor cooling is provided by the surrounding water. The machine is switched-on resp. -off by the float switch resp. an aquasensor which is immersed into the water. * * * * * * * * * * * * Calculation example Pool, SCP 16.000: Dimensions: 4x8 m, 1,5 m depth = 48 m3 = 48.000 l 1 ?“ hose with hose end 0,5 m above swimming pool level Beginning: 15.250 l/h, (16.000 + 14.500):2 End: 12.800 l/h Average: 14.000 l/h Time needed: 48.000:14.000= 3.4 hrs * More precise calculation: Beginning: 15.250 l/h, (16.000 + 14.500):2 End: 12.800 l/h Average: 14.000 l/h Time needed: 48.000:14.000= 3.4 hrs But: No hose resistance included! * * * * * * * * * Before starting the pump room (1) should be completely filled with water. The movement of the pump impeller (2) causes a water circuit inside of the pump which leads through the injector (3, Venturi principle). In the process the intake hose (4). This principle is called ?Jet-pump“. The injection motor (6) is air-fan-cooled (7). * * * * * An submersible pressure pump works almost the same way as an submersible pump. Depending on the pressure the submersible pressure pump is equipped with several impellers which are fixed to the motor shaft one after another to create a higher water pressure. Its lean cylindric design offers use in bore holes and spring shafts. * * * 4.4 与竞争对手的差异 最佳 更高的操作舒适度。开关大且易于使用。 特征 使噪声水平和能耗降至最低 个别可调的跟踪时间 5.5 巴 5.2/4.6 巴 在通风过程中舒适度更高 由透视窗进行舒适通风 优化的加注颈 标准加注颈 299,95 € 279,99/339,99 € 4,800 升/小时 4,500/5,500 升/小时 1,300 Wat瓦 1,300/1,000 瓦 技术数据 符合人机工程学的手柄 标准手柄 BPE 5000/55 AC RSP 5000/5 LCD / 6000/5 Inox LCD 通过升级客户的受益处 升级 升级 升级 升级 升级 升级 升级 通过更好的性能来节省时间。 主要标准是压力，单位巴+升/小时。 输送更高