[工学]隧道工程毕业设计.doc

静宁隧道综合设计 专业： 姓名： 指导老师： 摘 要：关键词： ABSTRACT As science and technology progresses,the modern tunnel either from the structure calculation ,or from the construction methods have a greater than before,the design for tunnel project, focusing on the structure calculation , focus on New Austrian Tunneling Method. According to the construction requirements of NATM ,according to the design requirement of the mission statement, Reference highway code for design of road tunnel and other design and construction specifications， the comprehensive design is made for JingNing Tunnel which is included in a highway of the mountainous area .This design paper includes the following several aspects : an overview of engineer geology to undeersrtand,according to geological conditions、according to geological conditions, hydrological conditions,and many other factors、portal design、tunnel cross-longthudinal design、structural design of tunnel lining、PavementDrainage and pipeline design and construction design and construction deshign groove and initial support for the tunnel structure calculation with the calculation of the secondary structure of the lining, the paper and also completed the calculation and design of ventilation and lighting system.Ultimately the reality outside the united states、a reasonable principle of saving to complete the JingNing tunnel design of this task . Key Words: Highway Tunnel , NATM , Water proof and drainage system , Lining　structure , Ventilation and lighting ，Monitoring survey ,　Structural calculation; 目 录 绪 论 1 第一章 设计背景资料 2 1.1 采用的技术标准及设计标准规范 2 1.1.1 主要技术标准 2 1.1.2 主要设计标准规范 2 1.2 工程概况 2 1.3 工程地质概况 2 第二章 总体设计 4 2.1 选址考虑 4 2.2洞口选址及线型考虑 4 2.3 纵断面设计 5 2.4 横断面设计 5 2.4.1 建筑限界 5 2.4.2 紧急停车带及横向通道 5 2.4.3 内轮廓设计 6 第三章 洞口设计 7 3.1 洞口段地质评价 7 3.2 洞口设计 7 3.2.1 洞门类型选择 7 3.2.2 洞口设计 7 第四章 支护及衬砌设计计算 10 4.1围岩压力计算 10 4.1.1断面参数确定 10 4.1.2计算垂直均布压力 10 4.1.3 浅埋和深埋隧道的分界 11 4.1.4围岩压力计算 12 4.2初期支护 12 4.2.1确定计算参数（工程类比法） 12 4.2.2计算隧道周边设计支护阻力Pi与径向位移ui 13 4.2.3计算初期支护能提供的支护阻力和允许隧道