[工学]程控交换系统的实现话路系统控制程序设计.docVIP

南 京 工 程 学 院 毕业设计说明书(论文) 作 者： 毕进娜 学 号： 208050301 系 部： 通信工程学院 专 业： 通信工程 题 目： 程控交换系统的实现（话路系统控制程序设计） 指导者： 李传森 工程师 评阅者： 2009年 6 月 南 京 摘要 随着信息技术的发展，信息己成为现代社会重要的战略资源，网络是信息传输的平台，而交换就是网络的核心。通信网络百余年的发展史己证明，并仍将证明:交换技术的突破将极大地推动通信网络的演进。面对信息时代的到来，人们在领略信息社会的乐趣的同时，也遇到了新的挑战，学习和掌握交换技术己成为有关工程技术人员和广大青年学生迫切的需要。 本文介绍了电话交换网的发展过程、程控交换系统的构成、程控交换系统的各个硬件模块、交换网络的工作过程、呼叫接续的步骤和基本原理。设计内容主要是根据程控交换系统的硬件电路，设计程控交换系统的控制程序，并与呼叫处理程序相结合，实现电话的基本功能。控制程序须根据线路状态，实时正确的判断各种呼叫信号，建立相应的呼叫处理事件，并根据用户呼叫状态，实现对交换网络以及拨号音、回铃音、忙音和振铃等信号的控制。 关键字：程控交换；交换网络；呼叫处理 Abstract With the development of information technology， information has became very important stratagem resource，network is a platform for information transmission, the core of network is exchange. The development history of communication network after more than one hundred years has proved that, and w ill still prove that, the great progress of exchange technology will promote the evolution of communication network. In the face of coming of information age, people enjoy the information society at the same time, people has encountered many challenges. It is very necessary to learn and master exchange technology for engineering person and college students. This article describes the development process of switched telephone network, the composition of SPC Switching System, the hardware modules of SPC Switching System, the work process of exchange networks, the steps and basic principles of call connection. Design elements are mainly based on the hardware circuit of SPC switching system, design control procedures of SPC Switching System and combine with call handling procedures to achieve the basic functions of phones. Control procedures judge a variety of call signal by the line status in time, establish the corresponding events of the ca