双容水箱比例控制系统设计.doc

双容水箱比例控制系统设计 设计总说明 本设计是针对双容水箱的液位控制系统，双容液位对象比例控制系统是基于PID算法的控制系统。本设计利用西门子S7-200可编程控制器实现液位PID 控制系统,并利用组态王软件制作人机对话界面,监控液位PLC控制系统的运行情况。实践证明,PLC可编程控制器和组态王软件结合有利于PLC控制系统的设计、检测,具有良好的应用价值。 本设计采用S7-200PLC，S7-200系列PLC的硬件系统配置灵活，即可用单独的CPU模块构成简单的开关量控制系统，也可通过I/O扩展或通信或联网功能构成中等规模的控制系统。 本设计中用到的双容水箱过程控制设备,选用SAC-JXGK过程控制装置。该装置小巧精致，功能较齐全，性能价格比高。它主要对一个温度、两个液位、两个流量、一个压力进行检测和控制，可以方便的组合多种控制实验，特别是本设计装置可组成耦合程度可调的双输入双输出控制系统，可通过调节手/自动阀的开度来调节耦合程度。还可通过计算机（用组态软件定义的各种画面与PLC通讯）对系统进行监控。 关键词：西门子S7-200可编程控制器; 液位PID 控制; 组态王 The proportion of two-tank control system Design Abstract This design is for two-tank liquid level control system, the proportion of two-tank liquid level control system is based on the object PID algorithm control system. This design using Siemens S7-200 programmable controller level PID control system, and Configuration software in production of man-machine interface dialogue, monitoring liquid level control system for PLC operation. Proved, PLC programmable controller and the combination of the Configuration software PLC control system design, testing, good value.  This design uses S7-200PLC, S7-200 series PLC hardware system configuration flexibility, you can use a separate CPU modules simple switching control mode, but also through the I / O extension or communication or networking functions that form the medium-scale control system .  The design used two-tank process control equipment, use SAC-JXGK process control devices. The device is compact, features a more complete, high cost performance. It is primarily a temperature, two level, two flow, a pressure detection and control, can facilitate the combination of a variety of control experiments, in particular, is the design of adjustable coupling device composed of two-input dual-output control system by adjusting hand / automatic valve to adjust the coupling degree of opening. Also by computer (using various screen configuration software-defined communication with the PLC) to monitor the system. Keywords: Siemens S7-2