带按键修改的数码管时钟.docVIP

#includereg51.h #define uchar unsigned char #define uint unsigned int uchar code dulatab[]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8, 0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e,0xbf}; uchar code keytab[]={0xE7,0xD7,0xB7,0x77,0xEB,0xDB,0xBB,0x7B, 0xED,0xDD,0xBD,0x7D,0xEE,0xDE,0xBE,0x7E}; uchar buf[8]={0}; uchar num,keyvalue,sec=0,min=0,hour=0,flag=0,counter=0,wei=-1; sbit wela=P1^3; sbit dula=P1^2; void delay(uchar u) { uchar i; for(;u0;u--) for(i=124;i0;i++); } void inito() { TMOD=0X01; TH0=(65536-50000)/256; TL0=(65536-50000)%256; EA=1; ET0=1; TR0=1; sec=46; min=59; hour=10; } void bcd() { buf[0]=sec%10; buf[1]=sec/10; buf[2]=16; buf[3]=min%10; buf[4]=min/10; buf[5]=16; buf[6]=hour%10; buf[7]=hour/10; } void display() { static uchar i; bcd(); P0=0; wela=1; wela=0; P0=dulatab[buf[i]]; dula=1; dula=0; P0=(1i); wela=1; wela=0; delay(2); if(++i8) i=0; } uchar key() { static uchar scan1,scan2,scan; static uchar i; P2=0XF0; scan1=P20xf0; if(scan1!=0XF0) { delay(5); if(scan1!=0xf0) { scan1=P20xf0; P2=0X0F; scan2=P20x0f; while(P2!=0x0f); scan=scan1|scan2; for(i=0;i16;i++) { if(scan==keytab[i]) { num=i; return(num); } } /* if(i==16) { ; return 0xff; } */ } // return 0xff; } return 10; } void keyscan() { uchar sec0,sec1,min0,min1,hour0,hour1,hour2; keyvalue=key(); switch(keyvalue) { case 0: { if(flag==0) { flag=1; TR0=0; } else { TR0=1; flag=0; wei=-1; } break; } case 1: { if(flag==1) { wei++; if(wei==2|wei==5) wei=wei+1; if(wei==8) wei=0; } break; } case 2: { if(flag==1) { if(wei==-1) wei=8; wei--; if(wei==5|wei==2) wei=wei-1; if(wei==-1) wei=7; } break; } case 3: { if(flag==0) { break; } if(wei==0) { sec0=sec%10; sec0++; if(sec0==10) sec0=9; sec = sec /10*10+sec0; } if(wei==1) { sec+=10;