基于51单片机的多用途无线呼叫系统的研发.doc

多用途无线呼叫系统的研发 摘 要 随着科技的进步以及对生活质量要求的不断提高，人们要求在消费中得到的服务更加快捷、方便、舒适，所以无线呼叫系统应运而生！ 本文基于AT89C2051控制数据信息的发送，编码芯片PT2262对信息进行编码，然后送给发射头，经过发射头将信息发送出去；母机中接收到信息后送给解码芯片PT2272，PT2272进行解码，然后将解码信息传送AT89C52，本文详细分析了上述实现原理，给出了主要程序，并通过了测试，有较强的实用价值。关键词：??  Development of Multi-Purpose Wireless Call System ABSTRACT With the advancement of technology and the improvement of the life quality demands continuesly, in communication consumption, people want to get the services faster and more convenient, comfortable, so that wireless call system comes into being! This paper introduces the Series 51-based remote control microcontroller (a distance of more than 50 meters) call information, After such data code, digital pipe show call information (sub-machine location) is a concrete realization of the process. This design includes three modules : the module of the wireless transmitter controlled by MCU, the module of the wireless receiver monitored by MCU, and information display module. That is, by a number of sub-machine (wireless transmitter) and the composition of a mother, after coding information from the machine launched mother received call information, the first judgment call whether the system is a fleet-Call, If the system is a fleet-Call, Call information shows. AT89C2051 machine-control data messages sent, Coder PT2262 encode the information, then were sent to launch the first, after the first launch will send out information; mother received the message given to the decoder chip PT2272, PT2272 decode Information would then be transmitted to the decoder AT89C52. Finally driven by the digital control chip and keyboard-driven ch452 information in the digital pipe show, These data reflect information call the locations or specific needs, and show that after each call, through the keys to remove the last show information to ensure the next receiving the flow of information. In this paper, a detailed analysis of the realization of the above principle, a main part, and passed the test, a s