A356铝合金半固态成形的数值模拟-JournalofNortheasternUniversity.PDFVIP

28 3 ( ) Vol128,No. 3 2 00 7 3 Journal of Northeastern Uni ersity( Natural Science) Mar. 2 0 0 7 A356 , , , ( , 110004) : ANSYS , , A356 : 590 e , # 5m/ s , , , , , # # : ;; ;; ; : TG 339 : A : 10052 3026(2007)04 Numer ical Simulat ion of Semi2solid For ming Pr ocess of A356 Alloy LU Gui2min, ZHAO Da2zhi , WAN G Ping , CUI Jian2zhong (Key Laboratory of Electromagnetic Processing of Materials, Minist ry of Education, Northeastern Uni ersity, Shenyang 110004, China. Correspondent: LU Gui2min, professor, E2mail: lu guimin @ yahoo. com. cn) - Abstr act: The FEA software ANSYS was applied to the numerical simulation coupling temperature field with elocity field to analyze the effect of mold filling temperature on the flow and temperature distribution of semi2solid slurry of A356 alloy during thixo2forming. The results showed that the semi2solid slurry is stable in filling process without spouting, air entrapment and hot spot area found in temperature distribution if the mold filling temperature is 590 e with an injecting rate 5 m/ s. Such conditions are ideal to the forming of semi2solid A356 alloy slurry because they are beneficial to getting fully filled semi2solid parts with clear contour and compact microstructure. The technological parameters obtained from numerical simulation are erified by tests. Key wor ds: semi2solid forming; numerical simulation; temperature field; mold filling temperature; solidification; mold filling process [ 1] ,