PCF8563时钟lcd1602显示.docVIP

//设计：刘辉华 //2010年01月20日 //lcd1602显示，pcf8563产生时钟，P3.0到P3.3四个独立按键 //P0口接lcd数据端 #includereg52.h #define uchar unsigned char #define uint unsigned int #define keyinc 0xfb #define keydec 0xf7 #define flaginc 0xfe #define flagdec 0xfd uchar num; sbit rw=P2^5; sbit lcdrs=P2^6; sbit lcden=P2^7; sbit sda=P2^1; uint year; uchar s,hour,min,sec,week,mon,day; sbit scl=P2^0; uchar flag=0; uchar code table[]={0,1,2,3,4,5,6,7,8,9,:,-}; //uint code table1[]={Mon,Tue,Wed,Thu,Fri,Sat,Sun}; uchar code table1[]={S,u,n,M,o,n,T,u,e,W,e,d,T,h,u,F,r,i,S,a,t}; uchar code table2[]={flag}; void delayus(); void write_add(uchar address,uchar date); delay(uint t) //延时函数 { uint i,j; for(i=0;it;i++) { for(j=0;j120;j++) {;} } } void write_com(uchar com) //写指令于lcd { rw=0; lcdrs=0; P0=com; delay(5); lcden=1; delay(5); lcden=0; } void write_data(uchar date) //写内容与lcd显示 { lcdrs=1; P0=date; delay(5); lcden=1; delay(5); lcden=0; } void init() //初始化 { rw=0; lcden=0; write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); write_com(0x80+0x10); sda=1; delayus(); scl=1; delayus(); write_add(0x00,0x00); write_add(0x01,0x00); write_add(0x02,0x57); write_add(0x03,0x56); write_add(0x04,0x09); write_add(0x05,0x20); write_add(0x06,0x04); write_add(0x07,0x01); write_add(0x08,0x10); } void delayus() //延时微秒函数 { ; } void start() //开始信号 { sda=1; delayus(); scl=1; delayus(); sda=0; delayus(); } void stop() //停止 { sda=0; delayus(); scl=1; delayus(); sda=1; delayus(); } void respons() //应答 { uchar i; scl=1; delayus(); while((sda==1)(i250))i++; scl=0; delayus(); } void write_byte(uchar date) //写一个字节子函数 { uchar i,temp; temp=date; for(i=0;i8;i++) { temp=temp1; scl=0; delayus(); sda=CY; delayus(); scl=1; delayus(); } scl=0; delayus(); sda=1; delayus(); } uchar read_byte() //读一个字节函数 { uchar i,k; scl=0; delayus(); sda=1; delayus(); for(i=0;i8;i++) { scl=1; delayus(); k=(k1)|sda; scl=0; delayus();