进气格栅模流分析报告精品.pptVIP

* System Pressure System Injection Pressure XY Plot (Taken at machine Nozzle) 最大注射压力：54.74MPa Max. injection pressure: 54.74MPa * Clamp Force Clamp Force XY Plot 最大锁模力：480Ton Max. Clamp force: 480Ton * Volumetric shrinkage at ejection Volumetric shrinkage 由图可知，产品表面的体积收缩率。 * Temperature part Temperature part picture Cavity Core * Circuit coolant temperature Circuit coolant temperature COMMENT: From the picture, it shows the difference the coolant inlet temperature and coolant out temperature is higher than 3c. The cooling system is not good. cavity 进出口水温差为4