and future of the EMC measurement standard EN 50289-1-6文档文档.pptVIP

The coupling between two lines could be generally expresses by the coupling transfer function. The equivalent circuit is expressed by the two lines with the characteristic impedence Z , the complex propagation constant ? , and the length L In the matched primary circuit a wave is traveling from the near end to the far end. Due to the electromagnetic coupling between the lines also in the secondary circuit a wave is traveling to the far end and another to the near end. As mentioned before we need a cable length of 100m to measure the coupling attenuation. If this length is arranged between the generator and the tube, the sensitivity of the system is reduced by the attenuation of this cable length. To avoid this drawback the required cable length may be arranged at the other end of the tube, where the tube now is open. In this way, full sensitivity of the system is given. To avoid disturbances from outside and unwanted reflections inside the tube magnetic ferrites are arranged at the open side of the tube. As mentioned before we need a cable length of 100m to measure the coupling attenuation. If this length is arranged between the generator and the tube, the sensitivity of the system is reduced by the attenuation of this cable length. To avoid this drawback the required cable length may be arranged at the other end of the tube, where the tube now is open. In this way, full sensitivity of the system is given. To avoid disturbances from outside and unwanted reflections inside the tube magnetic ferrites are arranged at the open side of the tube. As mentioned before we need a cable length of 100m to measure the coupling attenuation. If this length is arranged between the generator and the tube, the sensitivity of the system is reduced by the attenuation of this cable length. To avoid this drawback the required cable length may be arranged at the other end of the tube, where the tube now is open. In this way, full sensitivity of the system is given. To avoid distur