CESSNA525奖状1飞机主警告系统.ppt

第四章主警告 概述 功能和用途： 每个旋转测试位 警告灯板 警告 警戒 咨询 主警告灯 主警戒灯 复习题 警告灯板上的警告灯会怎么亮 –闪烁还是持续亮？－闪烁 警告灯板上的警戒灯会怎么亮 –闪烁还是持续亮？ －闪烁 主警告灯亮时 –闪烁还是持续亮？ －持续 复习题 主警戒灯亮时 –闪烁还是持续亮？ －稳定 按主警告/警戒灯复位键会发生什么？ 警告板警戒/警告灯长亮 主警戒/警告灯熄灭 复习题 如果造成红色警告灯闪亮的原因解除（不是通过按复位键） ，那么 : 警告灯板上的警告灯会 熄灭 主警戒灯会 熄灭 主警告灯会 保持闪亮 复习题 如果双发动机警戒灯亮会触发 双主警戒灯和主警告灯 咨询灯能触发主警戒灯吗? 是的 在地面，减推板选择收上并且油门低于85％ 在空中，减推板未锁好灯亮 复习题 当旋转测试时，如何进行风档引气测试? 将风档引气电门选择 BLEED HI位, 检查 W/S AIR O’HEAT 信号灯亮并且4″后主警戒灯亮 将风档引气电门选择 BLEED LOW位, 检查 W/S AIR O’HEAT 信号灯亮并且4″后主警戒灯亮 复习题 当旋转测试中，选择火警位时? 将测试发动机火警回路的完整性。保证火警回路中的惰性气体没有泄露，在必要时可以触发火警 将 引起LH 和 RH ENGINE FIRE 灯亮 问题 Introduce the class Describe how long it will last Describe how to find the information in the PTM Read the objectives Describe the location of the Rotary Test Switch Explain when the check is completed Explain that the avionics power should be turned on Note that once the switch is selected out of “OFF” the TEST indication light illuminates red Rotating clockwise the first position is fire warning Explain “continuity” Brief each bullet Brief each bullet Explain the bullet Discuss each bullet Explain and show what occurs when AOA is selected Discuss the difference between the CJ and CJ1 EFIS AOA presentation Brief the bullets This slide is hyper linked Describe the location of the windshield bleed air switch Click on the BLEED HI position – this hyper links to an animated slide with new bullets – read the bullets and describe what happens Then click on the LOW position and once again it is hyper linked to an animated slide – read the bullets and describe what happens Finally click anywhere out side of the Bleed Air switch area and the presentation will hyper link back to the proper position Explain the bullet Brief each bullet Explain that remaining in the ANTI SKID position will cause a continuous self-test Brief each bullet Brief each bullet Animated slide Each row will illuminate until reaching the 3rd row – then it stops Explain the the sequence would start all over again Advancing to t