机械毕业设计（论文）-1300热锯机设计精选.docxVIP

1300热锯机摘要从分析不同热锯机的优缺点着手，借鉴国内外先进的经验，并结合中国国情以及实际工作状况，设计了1300滚轮滑座式热锯机。该热锯机结构简单、新颖、紧凑，传动受力合理。运转准确可靠，制造成本低，备件费用低，安装维修方便，各部位润滑良好、密封结构完善，装备工艺性好，并总结了热锯机床在轧件生产中的作用及提出可能出现的问题，并介绍了该热锯机的设计思路及具体的设计步骤，并在参照了部分钢厂现行的热锯机的结构基础上，做了有效而实际性的改进。该滚轮滑座式热锯机的锯片是由电动机通过皮带传动的。由皮带带动锯片转动能够有效缓解振动，并且能够使电动机远离轧件，减小高温轧件对电机的热辐射，同时也起到过载保护作用。本文详细介绍了滚轮滑座式热锯机的结构特点及工作原理，精心选择了热锯机的结构参数和力能参数，并对热锯机各部分的选择进行了有理有据的分析并进行了校核，使的整个热锯机的设计达到了毕业设计的要求。关键词：热锯机 ；滚轮滑座式； 机构参数 ；力能参数1300 Heat SawAbstractBeginning of the advantages and defects on the roller slide type mill,using the experience of home and abroad for reference,thinking of our Chinese real status and real work conditions, a 1300 roller slide heat saw type mill is designed.The structure features and work principles of the mill are systematically expounded Particularly the structure of the heat saw is simple,new,and compact able,the transmission is reasonable forced.Accurate and reliable operation of heat saw,manufacture low-cost,low cost of spare parts,installation and maintenance convenience,each part is well lubricated,sealing well structured,the assembly process is good,and summed up the heat saw in rolled piece of production to the problems which may arise,introduced the heat saw design and specific steps to design and refer to the existing basis of the structure,made effective and practical improvements.The hot-sheer mill`s organ parameters and force parameters are selected meticulously.Analyses all kinds of parts of the roller slide heat saw type hot sheer mill and inspect them.The Design of Mill achieves the requirement of the design project for graduation.Keywords:heat saw;roller slide type;organ parameters;force parameters目 录1绪论11.1 锯切机的分类11.1.1 按锯切时钢材处于静止或运动状态分为11.1.2 按锯座能否移动分为11.1.3 按锯片的进锯方式分为11.2 方案选择21.2.1 设计给定条件32 总体方案设计42.1 热锯机的主传动机构方案设计42.2 热锯机的进锯机构方案设计42.3 热锯机的横移机构方案设计43 热锯机的参数设计53.1 热锯机结构参数设计53.1.1 锯片直径53.1.2 锯片厚度及加盘直径53.1.3 锯轴高度及锯片行程53.2 热锯机主要工艺参数设计63.2.1 锯片圆周速度63.2.2 进锯速度64 热锯机锯切功率的计算及电机的选择74.1 锯切作用力的计算74.1.1 锯切力计算74.1.2 正压力计算74.1.3 进锯阻力的计算84.2