变模温装置设计.pdfVIP

Abstract Melt filling，as a key stage in injection molding，is affected by mold temperature and will have dramatic influence in product quality, and fabrication efficiency. Therefore, it is of an importance and actual value to understand the mold temperature effects. This article based on the principle of electromagnetic induction heating designed the electromagnetic induction heating device, and using the ANSYS finite element software for numerical simulation. During the electromagnetic induction heating ,the effect of alternating current density, frequency, and the distance of induction coil and mold were analyzed The experimental results show that: When the imposed alternating current have a higher frequency or a higher current density or Reduce the distance of induction coil and mold ,the heating rate will higher. Induction heating process, the template has a linear relationship between temperature changing over time. Keywords: Variotherm; Induction heating; Finite element analysis i 目 录 Abstract i 目 录 I 1. 绪论 1 1.1 课题背景 1 1.2 快变模温的技术简介 2 1.3 电磁感应加热简介 4 1.4 ANSYS 有限元分析软件简介 5 1.5 本文的主要工作 5 2 电磁感应加热原理及特征 7 2.1 电磁感应加热基本原理 7 2.2 电磁感应加热特征 8 2.3 电磁感应加热的计算方法 9 3. ANSYS 仿真实验与结果分析 11 3.1 感应加热变模温控制方法 11 3.2 ANSYS 仿真实验 11 3.2.1 选取单元类型和建立数值模拟计算模型 11 3.2.2 材料物理参数的设定 12 3. 2.3 网格划分、载荷与边界条件 13 3.2.4 物理环境的定义 15 3.2.5 电磁场、温度场相互耦合的实现 15 3.2