Strength of cold formed steel shear diaphragms Scholars…冷成型钢剪切隔膜的强度学者.pdfVIP

Missouri University of Science and Technology Scholars Mine International Specialty Conference on Cold- (1978) - 4th International Specialty Conference on Formed Steel Structures Cold-Formed Steel Structures J un 1st, 12:00 AM Strength of cold formed steel shear diaphragms S. Chockalingam Paul Fazio Kinh Ha Follow this and additional works at : /isccss Recommended Citation S. Chockalingam, Paul Fazio, and Kinh Ha, Strength of cold formed steel shear diaphragms (J une 1, 1978). International Sp ecialty Conference on Cold-Formed Steel Structures. Paper 4. /isccss/4iccfss/4iccfss-session3/4 This Article - Conference proceedings is brought to you for free and open access by the Wei-Wen u Center for Cold-Formed Steel Structures at Scholars Mine. It has been accepted for inclusion in International Specialty Conference on Cold-Formed Steel Structures by an authorized administrator of Scholars Mine. For more information, please contact weaverjr@. STRENGTH OF COLD FORMED STEEL SHEAR DIAPHRAGMS By S. Chockalingam 1 , Paul Fazio 2 , and Kinh Ha 3 SUftt1ARY The design of cold formed steel shear diaphraQms is not yet covered by the structural codes of many countries including Canada. The shear capacity of steel diaphragms may be predicted by various approaches currently available, such as, those proposed by: 1) The Manual on Seismic Design for Buildings published by the U.S. Department of the A~, Navy and Air Force, Washington, D.C., 1966; 2) Bryans design approach which fonms the basis for the current design procedures for shear diaphragms included in the British code. In this paper, application of these