毕业设计（论文）-连接片级进模设计精选.docVIP

摘 要 本文主要了模设计经工艺分析、工艺计算，确定了该设计工艺流程及冲模结构形式Abstract This article has mainly analyzed the connect chips forming process, and introduces the bending, punching, progressive die and mould structure design pat .After analysis of the technical and the process calculation, determined the design process and die structure. Mould can realize automatic feeding and unloading, discharging .working performance is good, stamping have high quality. Use CAD drawing out the assembly parts, and the mould which have cavity part have been simulation processing. Through choice non-standard mold solved the problem of f