NCSexport参数说明.docVIP

Table 1 ?? The Contents of the result ID.conf File Configuration Data Explanation Result Name The name that the user has given the recording. Creator The UNIX user identity of the user who created the recording. Start Time The date and time when the recording started. Stop Time The date and time when the recording stopped. Result Status The current status of the recording: Ready for Analysis, Incomplete, or Complete. Cell Set Name The name of the cell set that was used during the recording. No. of Cells The number of cells that the recording contains. Day setting The days (Mon, Tue, Wed, Thu, Fri, Sat, or Sun) on which the recording was executed. Period #1...Period #4 The time of the day when the different recording periods were executed. Freq. Set The frequency set that was used in the recording. Rel SS Threshold (dB) The relative signal strength threshold defined for the recording. Abs SS Threshold (dBm) The absolute signal strength threshold defined for the recording. BA-List Change Interval (min) The time, in minutes, that a frequency was in the active BA-List. Max no. BA-List freq added The maximum number of test frequencies to be added to the BA-List at each interval. Table 2 ?? The Contents of the result ID.msmt File Measurement Data Explanation CellName The name of the cell where the recording has been executed. CellLayer The cell layer (1 - 8) in Hierarchical Cell Structure (HCS). CellLayerThr(GSM) The threshold value for handover criteria (HCS). BCCHno The ARFCN (Absolute Radio Frequency Channel Number) for measurement on BCCH. BSIC Base station identity code, where the first digit is the ncc (national colour code), and the second digit is the bcc (base station colour code). NbCellName The cell name that probably match this BCCH/BSIC combination. NbCellLayer The cell layer (1 - 8) of the probable cell. NbCellLayerThr(GSM) The threshold value for handover criteria (HCS). CellRecTime The actual time that the recording was a