光伏发电的MPPT.pdfVIP

Electric Power Components and Systems, 36:1208–1217, 2008 Copyright © Taylor Francis Group, LLC ISSN: 1532-5008 print/1532-5016 online DOI: 10.1080/15325000802084703 Simplified Maximum Power Point Tracking Method for the Grid-connected Wind Power Generation System HURNG-LIAHNG JOU,1 KUEN-DER WU,1 JINN-CHANG WU,2 and JIA-MIN SHEN1 1Department of Electrical Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan, R.O.C. 2Department of Microelectronics Engineering, National Kaohsiung Marine University, Kaohsiung, Taiwan, R.O.C. Abstract A novel maximum power point tracking (MPPT) method for the gr id- connected wind power generation system is proposed in this article. The main feature of the proposed method is that the MPPT of the wind power generation system can be obtained via only adjusting the amplitude of the DC/AC inverter’s output current and observing the output DC voltage of an AC/DC power converter connected with a permanent magnet synchronous wind generator (PMSWG). Thus, no practical calculation of generated power of the PMSWG is required. Experimental results of the developed prototype show that the performance of the proposed method is as expected. Keywords maximum power point tracking, wind power, power converter 1. Introduction The conventional energy sources for electrical power are hydraulic power, fossil fuels, and nuclear energy. The widely used fossil fuels result in the problem of greenhouse emissions worldwide, which also damages the earth’s environment. Moreover, fossil fuels will be exhausted in the future, and their cost