深圳新城电子有限公司-充电器厂家.docVIP

承认书 SPECTIFICATION FOR APPROVAL 产品名称（DESC）： 苹果充电器 客户名称（CUSTMOER）： 客户编号（CUSTMER P/N）： 产品编号（NUMBER）：TX-055IC（5V1A-IC方案） 页码（PAGE）: 版本（REV NO）： 编制 PREPARED BY 审核 CHECKED BY 批准 APPROVAL BY 承认 SIGNATURE 审核 CHECKED BY 批准 APPROVAL BY 供方签章： 客户签章： SUPPLIER CUSTOMER 日期： DATE 备注：承认签章后请回复一份（或复印件）给我司，其余由贵司留作存档。如果在签章的承认书（或复印件）未回复我司之前，下了有关此规格产品的定单且又无特别说明，那么我司就确定贵司已完全承认该份承认书了。 Please return one specification or one copy of it with your chop and signature of approval and retain the others for your record .In the event of an order being placed for this part number before the chop and signed with specification (or copy) is returned and without special explanstion,It will be assumed that approval have been given. Switching Power Supply Specifications Table of contents 描述：SCOPE 输入特性：INPUT CHARACTERISTICS 输出特性：OUTPUT CHARACTERISTICS 环境条件：ENVIRONMENTAL REQUIREMET EMC安全要求：SAFETY AND EMI REQUIIREMENT 结构参数：MECHANICAL REQUIRMENT 铭牌附图：LABEL 包装：PACKING 描述（SCOPE）： 本产品适应于世界各地各种标准。This product to adapt to all over the world all kinds of standards. 2、输入特性（INPUT CHARACTERISTICS）：VDD 端电容电压可以很快充至开启电压。启动电路中可以使用一个大阻值的电阻，在满足启动要求的同时，减小工作时的损耗。The machine chips starting current is very low, so the end of the capacitor voltage VDD can be quickly charged to the threshold voltage . Start-up circuit can be used in a large value resistor , to meet the start-up requirements , while reducing the loss of work time . 2.7 本机芯片内建有软启动功能，可以减少系统上电启动时各元器件的电压应力。当VDD 电压达到UVLO(OFF)时，芯片内部电路会将峰值电流阈值电压逐渐提升，具体来说是由接近于0V 提升至正常工作时的0.9V。芯片的每一次重启都会伴随着这个软启动过程。The machine chips built-in soft-start function , can reduce the voltage stress on the system when the various components of the electric starter . When VDD reaches UVLO (OFF), the peak current chip circuit will gradually increase the threshold voltage , specifically increased from close to 0V to 0.9V during normal operation . Each chip will be accompanied to restart the soft-start process. 2