数字化变电站保护装置试验室测试技术探讨.pdf

2011 年 第 5 卷 第 3 期 南 方 电 网 技 术 研究与分析 2011 ，Vol. 5 ，No. 3 SOUTHERN POWER SYSTEM TECHNOLOGY Study Analysis 文章编号：1674-0629 (2011)03-0065-04 中图分类号：TM774 文献标志码：A 数字化变电站保护装置实验室测试技术探讨 马凯，黄曙，陈炯聪，杨颖安 （广东电网公司电力科学研究院，广州510080 ） 摘要：由于硬件结构和实现方式与传统微机型保护装置的不同，对数字化变电站保护装置测试方法提出了新的要求。介绍数 字化保护装置的测试要求、可行测试方案和在实验室实现其功能测试、一致性测试的方法，研究数字化保护测试仪在工程测 试中的配置方法和测试方案，指出目前的测试仪无法考察在某些异常状态下保护装置的性能、多数测试仪不具备接收IRIG-B, IEEE 1588 码的功能等方面的不足，提出将工程测试和实验室平台测试相结合的思路。 关键词：IEC 61850 ；数字化保护；实验室测试；工程测试；数字化保护测试仪 Discussion on the Laboratory Test Technology of Protection Devices in Digital Substations MA Kai, HUANG Shu, CHEN Jiongcong, YANG Ying’an ( Electric Power Research Institute of Guangdong Power Grid Corporation, Guangzhou 510080, China ) Abstract: It is necessary to improve the testing method for the protection relay in digital substations as its hardware and signal processing are different from that of the traditional relay based on micro-computer. Analyzing the testing requirements, available schemes, this paper discusses the function and consistency testing methods of the digital protection device in laboratory. In addition, its configuration and testing scheme in engineering practice are also analyzed, pointing out that there is insufficiency in the current instruments such as unable to test the performance of protection devices in abnormal states, and, for most of them, to receive IRIG-B, IEEE 1588 synchronization signal, and thus the idea is proposed to combine the engineering method with the laboratory method. Key words: IEC 61850; digital protection; laboratory test; engineering test; digital relay testing instrument 随着 IEC 61850 标准的应用和数字化变电站技