1602软件调整背光.doc

1602软件调整背光 - 字光电位器调整?? 2010-07-29 14:53:39|??分类： 单片机 |??标签：diy1602模块程序??c51单片机程序??c51diy1602程序模块?? |字号大中小?订阅 /********************************************//*?1602可调背光程序--字光电位器调整??*//*?16脚1602,Vdd接LEDA,Vss接负,LEDK接P0^0?*//*?V0接电位器????????*//********************************************/#includereg52.h#define uint? unsigned int#define uchar unsigned char#define LCD_1602?P2 sbit LCD=P0^0;?//背光负极?;背光正极接通Vdd--LEDKsbit key1=P0^1;?//背光亮加sbit key2=P0^2;?//背交亮减 sbit rs=P0^3;?//数据/命令选择sbit rw=P0^4;?//读/写选择sbit ee=P0^5;?//使能信号 uchar code tmep1[]=;uchar code tmep2[]=?uint? i;char? tmp=0,tmp1=20,num=0;uchar key1_i=0,key2_i=0;void Delay(uint us){?while(us--);}//------------------------------------------------------////------------------------------------------------------//1602测忙bit LCD_bz(){?bit X;?rs=0;?rw=1;?ee=1;?Delay(5);?X=(bit)(LCD_16020x80);?ee=0;?return X;}//------------------------------------------------------////------------------------------------------------------//1602传指令/数据void write_1602(bit add,uchar count){?while(LCD_bz());?rs=add;?rw=0;?LCD_1602=count;?Delay(50);?ee=1;?Delay(50);?ee=0;}//------------------------------------------------------////------------------------------------------------------//1602初始化函数void INIT_1602(){?write_1602(0,0x3c);?write_1602(0,0x0f);?write_1602(0,0x06);?write_1602(0,0x01);}//------------------------------------------------------////------------------------------------------------------//1602显示void show_1602(uchar add,uchar *p){?write_1602(0,0x80|add);?Delay(5);?while(*p!=\0)??write_1602(1,*p++);}//------------------------------------------------------////------------------------------------------------------//void temp()interrupt 1{?uint i;?TH0=0xfc;?TL0=0x18;//------------------------------------------------------//1602背光可软件调整，字光电位器调整?if(300==i++)?{??i=0;??tmp=tmp1;?}?num++;? ?if(num==20)?{??num=0;??if(tmp!=0)???LCD=0;?}?if(num==tmp