毕业设计（论文）-可伸缩带式输送机机尾及贮带张紧装置设计推荐.doc

摘 要 随着工业科技的不断进步，作为散状物料的主要运输工具之一的带式输送机正朝着长距离、高带速、大运量的方向发展。所以对带式输送机的设计提出了更高的要求。 本文运用传统的设计方法以及近几年带传动理论研究的新成果对矿用可伸缩带式输送机的布型、带宽、滚筒、托辊以及拉紧储带装置和其他附件装置进行了设计计算，得出了完整的输送机机械系统的设计。 现代设计方法中的CAD和CAE等技术是实现创新设计的先进手段，它大大提高了设计质量，缩短了设计周期，减少了设计费用。为此，本文在传统的设计基础上还采用了现代机械设计方法中的CAD和CAE技术，对带式输送机的改向滚筒做了非通用设计。并对滚筒的壁厚和辐板的厚度，运用大型通用有限元软件ANSYS的APDL参数化语言进行了优化设计，得出了更加合理的结果。 　　本文也针对虚拟样机ADAMS在带式输送机中的应用做了浅要的探讨。通过Pro/ENGINEER软件建立改向滚筒的三维参数化模型，在ADAMS中针对滚筒轴承的偏心进行了仿真分析，得出轴承座在单侧和双侧偏心时的Z向加速度曲线。 关键词：带式输送机　滚筒 Pro/ENGINEER ADAMS Abstract Abstract With the continuous progress of industrial technology, bulk materials as the main means of transport, one of the belt conveyor is moving long-distance, with high-speed, large capacity direction. Therefore, the design of the belt conveyor has put forward higher requirements. In this paper, the use of traditional methods and the design of transmission in recent years with the new achievements in theoretical research on mine retractable cloth belt conveyor type, bandwidth, roller, roller and belt tension Reserve installations and other devices to annex the design and calculation , That a complete mechanical conveyor system design. Modern design in the CAD and CAE technologies to achieve innovative design of advanced means, it has greatly enhanced the design quality and shorten the design cycle and reduce the design costs. Therefore, this article in the traditional design is also based on the use of modern methods of mechanical design CAD and CAE technologies, the bend of the belt conveyor roller done a non-universal design. And the drum wall thickness and the thickness of plate convergence, the use of large-scale finite element software ANSYS APDL parameters of the language has been optimized design, that a more reasonable results. This article is also against the belt conveyor ADAMS virtual prototype of a light to do the study. Through the Pro / ENGINEER software to establish bend three-dimensional parameters of the cylinder model, in ADAMS against the eccentric